FOR THE PEOPLE WHO BUILD

KNOW THE SCOPE.
PLAN THE COST.

Start with the plans and scope. Save a private request for AI drafting or professional estimating, then check availability before expecting a result.

Twelve trades. Practical planning. A clear next step.

Construction footage: Estimators.io media library. Project diagram: original editorial illustration.

01 / TRADE-SPECIFIC ESTIMATING02 / PROJECT PLANNING03 / PROJECT DOCUMENTATION04 / CRM + PIPELINE

START WITH YOUR PLANS

AI DRAFT OR PROFESSIONAL ESTIMATOR.

Upload a PDF plan set and define the work, starting with electrical estimating or your trade. Choose an AI draft request or ask for a professional’s proposal. The estimating-service fee is what the professional charges to prepare the estimate; it is separate from the estimated construction cost.

Plan-request intake is available. AI generation and professional admission are opening soon; the request page shows current availability. Saving a request does not produce a completed estimate, assign a professional or open the wider system.

001 / WHO IT'S FOR

ONE PLATFORM.
EVERY SIDE
OF THE JOB.

01

HOMEOWNERS

Prepare a measurable project brief and understand what a contractor’s quote should include. The current calculator provides planning allowances, not a contractor quotation.

02

CONTRACTORS & TRADES

Define quantities, labour and exclusions for your trade. Explore the guides and apply to introduce your company; scheduling, invoicing and connected business tools remain planned.

03

PROJECT MANAGERS & GCs

Coordinate drawing revisions, scope boundaries and pricing assumptions across trades. The connected project-management system is opening soon; its wider service gates remain closed.

003 / THE INDUSTRIES

TWELVE TRADES.
ONE ECOSYSTEM.

Choose the work you need to estimate. Use the notes below to prepare quantities, identify missing information and compare complete scopes—not just a headline price.

TRADE 01 / 12

Are you pricing a roof?

Start with the roof area, pitch, access and existing layers. Separate removal, disposal, underlay, flashings, ventilation and gutters from the new covering so two quotes describe the same job.

Homeowners: share measurements and photos without climbing onto the roof. Contractors and estimators: state the measurement basis, waste allowance and treatment of hidden deck repairs before issuing a price.

Roof replacementLeak repairInspectionsGutters
Plan Roofing estimating
TRADE 02 / 12

Are you a carpenter?

Build a framing estimate from the current drawings, storeys, wall lengths, openings and structural details. Separate lumber and sheet quantities from labour, connectors, lifting and temporary protection.

Mark drawing revisions and assumptions. A homeowner can supply plans and access details; a framing contractor or takeoff specialist should confirm engineering, bracing and excluded work before a firm quote.

Wood framingSteel studsRoof trussesPost & beam
Plan Framing estimating
TRADE 03 / 12

Do you need a drywall takeoff?

Count board area by room, ceiling height, layers and specified assembly. Identify wet-area or rated boards, access, corner beads, finish level and ceilings separately instead of pricing every square foot as the same work.

Estimators: record whether openings are deducted and whether quantities include waste. Contractors: distinguish hanging from taping, sanding, protection and cleanup. Homeowners: explain the finish expected before comparing bids.

Board hangingTapingTexturingFinishing
Plan Drywall estimating
TRADE 04 / 12

Planning an electrical estimate?

Prepare a room-by-room list of devices, lighting and equipment, together with available drawings and the proposed renovation scope. Separate supply, installation, access and restoration allowances.

Ask a qualified electrical contractor to assess existing capacity, permits and conditions that cannot be established from a photo. An estimating allowance is not a load calculation, a safety assessment or permission to perform electrical work.

Panel upgradesRewiringEV chargersLighting
Plan Electrical estimating
TRADE 05 / 12

What should a plumbing quote include?

List fixtures, rough-in locations, pipework changes and access constraints. Distinguish fixture supply from installation, connection work, testing, demolition and making good so allowances stay visible.

Homeowners: record what remains and what moves. Estimators: note the drawing basis and unknown existing conditions. A qualified contractor must confirm routing, equipment suitability and the final installation scope.

Pipe installationDrain clearingWater heatersRough-ins
Plan Plumbing estimating
TRADE 06 / 12

Need an HVAC scope you can price?

Record the spaces served, existing equipment, desired outcome and available plans. Separate equipment allowances, distribution work, controls, access, removal and commissioning rather than comparing equipment prices alone.

Heating and cooling loads, refrigerant work and system selection require qualified assessment. Show which design information is confirmed and which quantities or performance assumptions still need the contractor’s review.

HeatingAir conditioningHeat pumpsRefrigeration
Plan HVAC & Refrigeration estimating
TRADE 07 / 12

Are you a gasfitter preparing a quote?

Define the appliance or equipment change, its location, existing service information and the proposed scope. Itemise access, materials, permits, testing and commissioning as applicable to the assessed job.

A site visit and qualified gas contractor determine capacity, routing, venting and safety requirements. Use the brief to compare complete scopes; it is not a gas-system design or a set of installation instructions.

Gas linesAppliance hookupsPressure testingBoilers
Plan Gas Fitting estimating
TRADE 08 / 12

Pricing trim, doors or custom millwork?

Measure lengths and count openings, then identify profiles, materials, door hardware and the finish required. Separate shop fabrication from delivery, installation, scribing and surface preparation.

Carpenters: identify who supplies materials and handles painting. Estimators: document waste and site-fit allowances. Homeowners: include reference details and existing conditions so a bespoke item is not compared with a standard unit.

Crown mouldingCustom built-insStaircasesMillwork
Plan Finishing Carpentry estimating
TRADE 09 / 12

Are you a painter estimating the finish?

Build the scope around surface area, height, substrate condition and the specified coating system. Separate preparation, repairs, masking and protection from application; identify walls, ceilings, trim and cabinetry individually.

State the assumed number of coats, access method and colour changes. Homeowners should share occupied-room and furniture constraints. Painters and estimators should make exclusions and provisional repair allowances clear before comparing prices.

InteriorsExteriorsCabinet refinishingEpoxy flooring
Plan Painting estimating
TRADE 10 / 12

Define what comes out—and what stays.

Mark retained structures, services and finishes before measuring demolition quantities. Separate protection, disconnection by appropriate trades, removal, handling, disposal and site access from the demolition itself.

Hazardous-material surveys and structural review may be needed before scope and price can be confirmed. Record unknown conditions rather than assuming clear access, ordinary waste or permission to remove structural elements.

TeardownsInterior strip-outsConcrete removalSite clearing
Plan Demolition estimating
TRADE 11 / 12

Planning paving or a retaining wall?

Start with a measured layout, levels, access and the proposed finish. Separate excavation, spoil removal, base preparation, drainage, edging and surface materials; show delivery and equipment assumptions.

Ground conditions and retaining-wall design can materially change the scope. Homeowners: explain the intended use and drainage concerns. Contractors and estimators: identify survey, engineering and unforeseen-ground allowances that remain to be confirmed.

PatiosRetaining wallsDrivewaysNatural stone
Plan Hardscaping estimating
TRADE 12 / 12

What does the tree-work estimate cover?

Identify each tree, the requested outcome, access and nearby constraints. Separate assessment, permitted work, equipment, debris removal and stump treatment so the proposal has a clear extent.

Use ground-level photos and existing reports; do not attempt risky measurements or tree work. An appropriately qualified arborist must assess condition, permissions and the safe method before a final scope is agreed.

Tree removalPruningStump grindingStorm response
Plan Tree Care estimating

THE NEXT JOB STARTS HERE

READY TO
BUILD BETTER?

Get started